Post by nite on Nov 14, 2006 12:54:47 GMT 10
Before I show this to you guys, you should know that I SUCK at photography.
Well, here is the front of it,
on the top is a DVD writer with lightscribe(USB)
max 16X speed,
drive bay 1 is a CD writer. came with the comp.
I dont use it anymore, (its stuck)
Drive bay 2 has an Enermax UC-9FATR2 multifunction panel installed.
ONE ROYAL PAIN IN THE ASS TO GET HOOKED UP!!!!
due to my current motherboard im not able to get everything working.
also, I killed the LCD display with a static jolt (DAMNIT!)
[all the lcd display did was show fan speed and tempertures, I have a program for that now{speedfan}]
drive bay 3 has an old floppy drive,
hooked it in to veiw some old photos.
(its actually acting as a cooling plate for the hard drive that is directally below it)
aint no secret that I colored it with a magic marker. (looks beter IRL)
drive bay 4 and 5(hidden behind the frame) have 2 hard drives.
The inside of this thing,
More wires than the frikken whitehouse.
motherboard is a giovani 2.
That middle fan was running at 4219 RPMs at the time this photo was taken,
yes, i saw the wire in front of it,
My finger STILL hurts...
that red chip is an ati radeon 9250 graphics card
man, looks like someone puked a bunch of wires.. (gotta get that straitened up)
The ram card has an aluminum cooling plate clipped on. it works quite well.
![]()
img83.imageshack.us/img83/152/onewaytovoidthewarenteevc2.jpg[
do NOT do this!!!
This voids the warentee.
it may work, but it has its risks.
The card readers connector, (part of the multifunction panel)
i wanted the usb pins for the front usb ports,
(plus the card reader had a hardware clash with the dvd writer)
what I did was I took the usb jumper (wich dident work with the front plugs like it should have)
put in some copper jewlery wire.
and rubber banded it togeather.
after voiding the warentee, it worked...
no joke...
Internal readouts from speedfan.
Keep in mind that it dosent actually tell you what is what.
on that note, it also dosent tell you what dosent apply. (fan controller on the multifunction panel)
(as if you couldent tell what i wrote in)
Be carefull with this program!
THIS IS OVERCLOCKING SOFTWARE!
unless you actually know what you are doing you could do some major damage to your comp.
I only use this to monitor the internal temperture of the Hardware.
As you can tell, the fan controller has made a big diference in temperture.
Well, here is the front of it,
on the top is a DVD writer with lightscribe(USB)
max 16X speed,
drive bay 1 is a CD writer. came with the comp.
I dont use it anymore, (its stuck)
Drive bay 2 has an Enermax UC-9FATR2 multifunction panel installed.
ONE ROYAL PAIN IN THE ASS TO GET HOOKED UP!!!!
due to my current motherboard im not able to get everything working.
also, I killed the LCD display with a static jolt (DAMNIT!)
[all the lcd display did was show fan speed and tempertures, I have a program for that now{speedfan}]
drive bay 3 has an old floppy drive,
hooked it in to veiw some old photos.
(its actually acting as a cooling plate for the hard drive that is directally below it)
aint no secret that I colored it with a magic marker. (looks beter IRL)
drive bay 4 and 5(hidden behind the frame) have 2 hard drives.
The inside of this thing,
More wires than the frikken whitehouse.
motherboard is a giovani 2.
That middle fan was running at 4219 RPMs at the time this photo was taken,
yes, i saw the wire in front of it,
My finger STILL hurts...
that red chip is an ati radeon 9250 graphics card
man, looks like someone puked a bunch of wires.. (gotta get that straitened up)
The ram card has an aluminum cooling plate clipped on. it works quite well.
do NOT do this!!!
This voids the warentee.
it may work, but it has its risks.
The card readers connector, (part of the multifunction panel)
i wanted the usb pins for the front usb ports,
(plus the card reader had a hardware clash with the dvd writer)
what I did was I took the usb jumper (wich dident work with the front plugs like it should have)
put in some copper jewlery wire.
and rubber banded it togeather.
after voiding the warentee, it worked...
no joke...
Internal readouts from speedfan.
Keep in mind that it dosent actually tell you what is what.
on that note, it also dosent tell you what dosent apply. (fan controller on the multifunction panel)
(as if you couldent tell what i wrote in)
Be carefull with this program!
THIS IS OVERCLOCKING SOFTWARE!
unless you actually know what you are doing you could do some major damage to your comp.
I only use this to monitor the internal temperture of the Hardware.
As you can tell, the fan controller has made a big diference in temperture.
